Git Source Code Mirror - This is a publish-only repository and all pull requests are ignored. Please follow Documentation/SubmittingPatches procedure for any of your improvements.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

308 lines
11 KiB

gitrepository-layout - Git Repository Layout
A Git repository comes in two different flavours:
* a `.git` directory at the root of the working tree;
* a `<project>.git` directory that is a 'bare' repository
(i.e. without its own working tree), that is typically used for
exchanging histories with others by pushing into it and fetching
from it.
*Note*: Also you can have a plain text file `.git` at the root of
your working tree, containing `gitdir: <path>` to point at the real
directory that has the repository. This mechanism is often used for
a working tree of a submodule checkout, to allow you in the
containing superproject to `git checkout` a branch that does not
have the submodule. The `checkout` has to remove the entire
submodule working tree, without losing the submodule repository.
These things may exist in a Git repository.
Object store associated with this repository. Usually
an object store is self sufficient (i.e. all the objects
that are referred to by an object found in it are also
found in it), but there are a few ways to violate it.
. You could have an incomplete but locally usable repository
by creating a shallow clone. See linkgit:git-clone[1].
. You could be using the `objects/info/alternates` or
`$GIT_ALTERNATE_OBJECT_DIRECTORIES` mechanisms to 'borrow'
objects from other object stores. A repository with this kind
of incomplete object store is not suitable to be published for
use with dumb transports but otherwise is OK as long as
`objects/info/alternates` points at the object stores it
borrows from.
This directory is ignored if $GIT_COMMON_DIR is set and
"$GIT_COMMON_DIR/objects" will be used instead.
A newly created object is stored in its own file.
The objects are splayed over 256 subdirectories using
the first two characters of the sha1 object name to
keep the number of directory entries in `objects`
itself to a manageable number. Objects found
here are often called 'unpacked' (or 'loose') objects.
Packs (files that store many objects in compressed form,
along with index files to allow them to be randomly
accessed) are found in this directory.
Additional information about the object store is
recorded in this directory.
This file is to help dumb transports discover what packs
are available in this object store. Whenever a pack is
added or removed, `git update-server-info` should be run
to keep this file up to date if the repository is
published for dumb transports. 'git repack' does this
by default.
This file records paths to alternate object stores that
this object store borrows objects from, one pathname per
line. Note that not only native Git tools use it locally,
but the HTTP fetcher also tries to use it remotely; this
will usually work if you have relative paths (relative
to the object database, not to the repository!) in your
alternates file, but it will not work if you use absolute
paths unless the absolute path in filesystem and web URL
is the same. See also `objects/info/http-alternates`.
This file records URLs to alternate object stores that
this object store borrows objects from, to be used when
the repository is fetched over HTTP.
References are stored in subdirectories of this
directory. The 'git prune' command knows to preserve
objects reachable from refs found in this directory and
its subdirectories.
This directory is ignored (except refs/bisect,
refs/rewritten and refs/worktree) if $GIT_COMMON_DIR is
set and "$GIT_COMMON_DIR/refs" will be used instead.
records tip-of-the-tree commit objects of branch `name`
records any object name (not necessarily a commit
object, or a tag object that points at a commit object).
records tip-of-the-tree commit objects of branches copied
from a remote repository.
records the SHA-1 of the object that replaces `<obj-sha1>`.
This is similar to info/grafts and is internally used and
maintained by linkgit:git-replace[1]. Such refs can be exchanged
between repositories while grafts are not.
records the same information as refs/heads/, refs/tags/,
and friends record in a more efficient way. See
linkgit:git-pack-refs[1]. This file is ignored if $GIT_COMMON_DIR
is set and "$GIT_COMMON_DIR/packed-refs" will be used instead.
A symref (see glossary) to the `refs/heads/` namespace
describing the currently active branch. It does not mean
much if the repository is not associated with any working tree
(i.e. a 'bare' repository), but a valid Git repository
*must* have the HEAD file; some porcelains may use it to
guess the designated "default" branch of the repository
(usually 'master'). It is legal if the named branch
'name' does not (yet) exist. In some legacy setups, it is
a symbolic link instead of a symref that points at the current
HEAD can also record a specific commit directly, instead of
being a symref to point at the current branch. Such a state
is often called 'detached HEAD.' See linkgit:git-checkout[1]
for details.
Repository specific configuration file. This file is ignored
if $GIT_COMMON_DIR is set and "$GIT_COMMON_DIR/config" will be
used instead.
Working directory specific configuration file for the main
working directory in multiple working directory setup (see
A slightly deprecated way to store shorthands to be used
to specify a URL to 'git fetch', 'git pull' and 'git push'.
A file can be stored as `branches/<name>` and then
'name' can be given to these commands in place of
'repository' argument. See the REMOTES section in
linkgit:git-fetch[1] for details. This mechanism is legacy
and not likely to be found in modern repositories. This
directory is ignored if $GIT_COMMON_DIR is set and
"$GIT_COMMON_DIR/branches" will be used instead.
Hooks are customization scripts used by various Git
commands. A handful of sample hooks are installed when
'git init' is run, but all of them are disabled by
default. To enable, the `.sample` suffix has to be
removed from the filename by renaming.
Read linkgit:githooks[5] for more details about
each hook. This directory is ignored if $GIT_COMMON_DIR is set
and "$GIT_COMMON_DIR/hooks" will be used instead.
When multiple working trees are used, most of files in
$GIT_DIR are per-worktree with a few known exceptions. All
files under 'common' however will be shared between all
working trees.
The current index file for the repository. It is
usually not found in a bare repository.
The shared index part, to be referenced by $GIT_DIR/index and
other temporary index files. Only valid in split index mode.
Additional information about the repository is recorded
in this directory. This directory is ignored if $GIT_COMMON_DIR
is set and "$GIT_COMMON_DIR/info" will be used instead.
This file helps dumb transports discover what refs are
available in this repository. If the repository is
published for dumb transports, this file should be
regenerated by 'git update-server-info' every time a tag
or branch is created or modified. This is normally done
from the `hooks/update` hook, which is run by the
'git-receive-pack' command when you 'git push' into the
This file records fake commit ancestry information, to
pretend the set of parents a commit has is different
from how the commit was actually created. One record
per line describes a commit and its fake parents by
listing their 40-byte hexadecimal object names separated
by a space and terminated by a newline.
Note that the grafts mechanism is outdated and can lead to problems
transferring objects between repositories; see linkgit:git-replace[1]
for a more flexible and robust system to do the same thing.
This file, by convention among Porcelains, stores the
exclude pattern list. `.gitignore` is the per-directory
ignore file. 'git status', 'git add', 'git rm' and
'git clean' look at it but the core Git commands do not look
at it. See also: linkgit:gitignore[5].
Defines which attributes to assign to a path, similar to per-directory
`.gitattributes` files. See also: linkgit:gitattributes[5].
This file stores sparse checkout patterns.
See also: linkgit:git-read-tree[1].
Stores shorthands for URL and default refnames for use
when interacting with remote repositories via 'git fetch',
'git pull' and 'git push' commands. See the REMOTES section
in linkgit:git-fetch[1] for details. This mechanism is legacy
and not likely to be found in modern repositories. This
directory is ignored if $GIT_COMMON_DIR is set and
"$GIT_COMMON_DIR/remotes" will be used instead.
Records of changes made to refs are stored in this directory.
See linkgit:git-update-ref[1] for more information. This
directory is ignored (except logs/HEAD) if $GIT_COMMON_DIR is
set and "$GIT_COMMON_DIR/logs" will be used instead.
Records all changes made to the branch tip named `name`.
Records all changes made to the tag named `name`.
This is similar to `info/grafts` but is internally used
and maintained by shallow clone mechanism. See `--depth`
option to linkgit:git-clone[1] and linkgit:git-fetch[1]. This
file is ignored if $GIT_COMMON_DIR is set and
"$GIT_COMMON_DIR/shallow" will be used instead.
If this file exists, $GIT_COMMON_DIR (see linkgit:git[1]) will
be set to the path specified in this file if it is not
explicitly set. If the specified path is relative, it is
relative to $GIT_DIR. The repository with commondir is
incomplete without the repository pointed by "commondir".
Contains the git-repositories of the submodules.
Contains administrative data for linked
working trees. Each subdirectory contains the working tree-related
part of a linked working tree. This directory is ignored if
$GIT_COMMON_DIR is set, in which case
"$GIT_COMMON_DIR/worktrees" will be used instead.
A text file containing the absolute path back to the .git file
that points to here. This is used to check if the linked
repository has been manually removed and there is no need to
keep this directory any more. The mtime of this file should be
updated every time the linked repository is accessed.
If this file exists, the linked working tree may be on a
portable device and not available. The presence of this file
prevents `worktrees/<id>` from being pruned either automatically
or manually by `git worktree prune`. The file may contain a string
explaining why the repository is locked.
Working directory specific configuration file.
link:user-manual.html[The Git User's Manual]
Part of the linkgit:git[1] suite