Official read only mirror of the smartmontools project SVN https://www.smartmontools.org/browser
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
smartmontools/smartmontools/ataprint.h

109 lines
4.2 KiB

/*
* ataprint.h
*
* Home page of code is: https://www.smartmontools.org
*
* Copyright (C) 2002-09 Bruce Allen
* Copyright (C) 2008-21 Christian Franke
* Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#ifndef ATAPRINT_H_
#define ATAPRINT_H_
#define ATAPRINT_H_CVSID "$Id$\n"
#include <vector>
// Request to dump a GP or SMART log
struct ata_log_request
{
bool gpl = false; // false: SMART, true: GP
unsigned char logaddr = 0; // Log address
unsigned page = 0; // First page (sector)
unsigned nsectors = 0; // # Sectors
};
// Options for ataPrintMain
struct ata_print_options
{
bool drive_info = false;
int identify_word_level = -1, identify_bit_level = -1;
bool smart_check_status = false;
bool smart_general_values = false;
bool smart_vendor_attrib = false;
bool smart_error_log = false;
bool smart_selftest_log = false;
bool smart_selective_selftest_log = false;
bool gp_logdir = false, smart_logdir = false;
unsigned smart_ext_error_log = 0;
unsigned smart_ext_selftest_log = 0;
bool retry_error_log = false, retry_selftest_log = false;
std::vector<ata_log_request> log_requests;
bool devstat_all_pages = false, devstat_ssd_page = false;
std::vector<int> devstat_pages;
unsigned pending_defects_log = 0;
bool sct_temp_sts = false, sct_temp_hist = false;
int sct_erc_get = 0; // get(1), get_power_on(2)
int sct_erc_set = 0; // set(1), set_power_on(2), mfg_default(3)
unsigned sct_erc_readtime = 0, sct_erc_writetime = 0;
bool sataphy = false, sataphy_reset = false;
bool smart_disable = false, smart_enable = false;
bool smart_auto_offl_disable = false, smart_auto_offl_enable = false;
bool smart_auto_save_disable = false, smart_auto_save_enable = false;
int smart_selftest_type = -1; // OFFLINE_FULL_SCAN, ..., see atacmds.h. -1 for no test
bool smart_selftest_force = false; // Ignore already running test
ata_selective_selftest_args smart_selective_args; // Extra args for selective self-test
unsigned sct_temp_int = 0;
bool sct_temp_int_pers = false;
enum { FMT_BRIEF = 0x01, FMT_HEX_ID = 0x02, FMT_HEX_VAL = 0x04 };
unsigned char output_format = 0; // FMT_* flags
firmwarebug_defs firmwarebugs; // -F options
bool fix_swapped_id = false; // Fix swapped ID strings returned by some buggy drivers
ata_vendor_attr_defs attribute_defs; // -v options
bool ignore_presets = false; // Ignore presets from drive database
bool show_presets = false; // Show presets and exit
unsigned char powermode = 0; // Skip check, if disk in idle or standby mode
unsigned char powerexit = 0; // exit() code for low power mode
int powerexit_unsup = -1; // exit() code for unsupported power mode or -1 to ignore
bool get_set_used = false; // true if any get/set command is used
bool get_aam = false; // print Automatic Acoustic Management status
int set_aam = 0; // disable(-1), enable(1..255->0..254) Automatic Acoustic Management
bool get_apm = false; // print Advanced Power Management status
int set_apm = 0; // disable(-1), enable(2..255->1..254) Advanced Power Management
bool get_lookahead = false; // print read look-ahead status
int set_lookahead = 0; // disable(-1), enable(1) read look-ahead
int set_standby = 0; // set(1..255->0..254) standby timer
bool set_standby_now = false; // set drive to standby
bool get_security = false; // print ATA security status
bool set_security_freeze = false; // Freeze ATA security
bool get_wcache = false; // print write cache status
int set_wcache = 0; // disable(-1), enable(1) write cache
bool sct_wcache_reorder_get = false; // print write cache reordering status
int sct_wcache_reorder_set = 0; // disable(-1), enable(1) write cache reordering
bool sct_wcache_reorder_set_pers = false;
bool sct_wcache_sct_get = false; // print SCT Feature Control of write cache status
int sct_wcache_sct_set = 0; // determined by ata set features command(1), force enable(2), force disable(3)
bool sct_wcache_sct_set_pers = false; // persistent or volatile
bool get_dsn = false; // print DSN status
int set_dsn = 0; // disable(02h), enable(01h) DSN
};
int ataPrintMain(ata_device * device, const ata_print_options & options);
#endif