smartctl.8.in, smartd.conf.5.in, update-smart-drivedb.8.in:

Remove EXPERIMENTAL notes for features added before 7.2.

git-svn-id: http://svn.code.sf.net/p/smartmontools/code/trunk@5345 4ea69e1a-61f1-4043-bf83-b5c94c648137
pull/86/merge
chrfranke 7 months ago
parent a1c0bee2ed
commit 306633e188
  1. 5
      smartmontools/ChangeLog
  2. 23
      smartmontools/smartctl.8.in
  3. 17
      smartmontools/smartd.conf.5.in
  4. 1
      smartmontools/update-smart-drivedb.8.in

@ -1,5 +1,10 @@
$Id$
2022-03-04 Christian Franke <franke@computer.org>
smartctl.8.in, smartd.conf.5.in, update-smart-drivedb.8.in:
Remove EXPERIMENTAL notes for features added before 7.2.
2022-03-02 Christian Franke <franke@computer.org>
do_release: Add '--nocheck' option.

@ -351,7 +351,7 @@ byte array (\*(AqKEY_le\*(Aq).
By default, the additional elements are only output if the value actually
exceeds the range.
.br
\*(Aqy\*(Aq: [NEW EXPERIMENTAL SMARTCTL FEATURE] Outputs in YAML format.
\*(Aqy\*(Aq: Outputs in YAML format.
.Sp
The following two arguments are primarily indented for development:
.br
@ -482,8 +482,7 @@ to the driver.
The default namespace id is the broadcast namespace id (0xffffffff).
.Sp
.I sntrealtek
\- [NEW EXPERIMENTAL SMARTCTL FEATURE]
this device type is for NVMe disks that are behind a Realtek USB to NVMe
\- this device type is for NVMe disks that are behind a Realtek USB to NVMe
bridge.
.Sp
.\" %ENDIF NOT OS Darwin
@ -723,9 +722,8 @@ Vendor Specific Log at address 0xc0.
Using this option with other devices may have undesirable side effects.\fP
.Sp
.I jmb39x[\-q],N[,sLBA][,force][+TYPE]
\- [NEW EXPERIMENTAL SMARTCTL FEATURE]
the device consists of multiple SATA disks connected to a JMicron JMB39x RAID
port multiplier.
\- the device consists of multiple SATA disks connected to a JMicron JMB39x
RAID port multiplier.
The suffix \*(Aq\-q\*(Aq selects a slightly different command variant used by
some QNAP NAS devices.
The integer N is the port number from 0 to 4.
@ -745,8 +743,7 @@ The \*(Aqforce\*(Aq flag disables this check.
with a signal.\fP
.Sp
.I jms56x,N[,sLBA][,force][+TYPE]
\- [NEW EXPERIMENTAL SMARTCTL FEATURE]
the device consists of multiple SATA disks connected to a JMicron JMS56x
\- the device consists of multiple SATA disks connected to a JMicron JMS56x
USB to SATA RAID bridge.
See \*(Aqjmb39x...\*(Aq above for valid arguments.
.TP
@ -851,9 +848,7 @@ behaviour.
This is does not work for SCSI devices yet.
.TP
.B \-n POWERMODE[,STATUS[,STATUS2]], \-\-nocheck=POWERMODE[,STATUS[,STATUS2]]
[ATA]
[SCSI: NEW EXPERIMENTAL SMARTCTL FEATURE]
Specifies if \fBsmartctl\fP should exit before performing any
[ATA, SCSI] Specifies if \fBsmartctl\fP should exit before performing any
checks when the device is in a low-power mode.
It may be used to prevent a disk from being spun-up by \fBsmartctl\fP.
The power mode is ignored by default.
@ -1073,8 +1068,7 @@ placed in the STANDBY mode without temporarily placing it in the IDLE mode.
Note that ATA standards do not specify a command to set the standby timer
without affecting the power mode.
.br
[SCSI: NEW EXPERIMENTAL SMARTCTL FEATURE]
Only the set option with \*(Aqstandby,off\*(Aq or
[SCSI] Only the set option with \*(Aqstandby,off\*(Aq or
\*(Aqstandby,0\*(Aq is accepted and will place the SCSI disk
into "ACTIVE" power condition.
.Sp
@ -1084,8 +1078,7 @@ This usually spins down the drive.
The setting of the standby timer is not affected unless
\*(Aq\-s standby,[N|off]\*(Aq is also specified.
.br
[SCSI: NEW EXPERIMENTAL SMARTCTL FEATURE]
Only the set option is accepted and will place the SCSI
[SCSI] Only the set option is accepted and will place the SCSI
disk into "STANDBY_Z" power condition.
.Sp
.I wcache[,on|off]

@ -1,6 +1,6 @@
.ig
Copyright (C) 2002-10 Bruce Allen
Copyright (C) 2004-21 Christian Franke
Copyright (C) 2004-22 Christian Franke
SPDX-License-Identifier: GPL-2.0-or-later
@ -292,10 +292,7 @@ Warning emails will be sent for all monitored devices.
A device is ignored by DEVICESCAN if a configuration line with the same
device name exists.
.\" %IF NOT OS Windows OS2
.br
[NEW EXPERIMENTAL SMARTD FEATURE]
Symbolic links are resolved before this check is done.
.PP
.\" %ENDIF NOT OS Windows OS2
A device name is also ignored if another device with same identify
information (vendor, model, firmware version, serial number, WWN) already
@ -470,8 +467,7 @@ to the driver.
The default namespace id is the broadcast namespace id (0xffffffff).
.Sp
.I sntrealtek
\- [NEW EXPERIMENTAL SMARTD FEATURE]
this device type is for NVMe disks that are behind a Realtek USB to NVMe
\- this device type is for NVMe disks that are behind a Realtek USB to NVMe
bridge.
.Sp
.\" %ENDIF NOT OS Darwin
@ -569,17 +565,15 @@ The integer N is the port number from 0 to 3 of the ATA drive to be targeted.
Please see the \fBsmartctl\fP(8) man page for further details.
.Sp
.I jmb39x[\-q],N[,sLBA][,force][+TYPE]
\- [NEW EXPERIMENTAL SMARTD FEATURE]
the device consists of multiple SATA disks connected to a JMicron JMB39x RAID
port multiplier.
\- the device consists of multiple SATA disks connected to a JMicron JMB39x
RAID port multiplier.
The suffix \*(Aq\-q\*(Aq selects a slightly different command variant used by
some QNAP NAS devices.
The integer N is the port number from 0 to 4.
Please see the \fBsmartctl\fP(8) man page for further details.
.Sp
.I jms56x,N[,sLBA][,force][+TYPE]
\- [NEW EXPERIMENTAL SMARTD FEATURE]
the device consists of multiple SATA disks connected to a JMicron JMS56x
\- the device consists of multiple SATA disks connected to a JMicron JMS56x
USB to SATA RAID bridge.
See \*(Aqjmb39x...\*(Aq above for valid arguments.
.Sp
@ -884,7 +878,6 @@ single decimal digit or the match will always fail!
.\" This resets the margin to the level prior to the '.RS ... .RE' block.
.TP
.B \&
[NEW EXPERIMENTAL SMARTD FEATURE]
If the regular expression contains substrings of the form \fB:NNN\fP
or \fB:NNN-LLL\fP, where NNN and LLL are three decimal digits, staggered
tests are enabled.

@ -150,7 +150,6 @@ This requires \*(Aq\-\-no\-verify\*(Aq because the trunk versions are not
signed.
.TP
.B \-\-branch X.Y
[NEW EXPERIMENTAL UPDATE-SMART-DRIVEDB FEATURE]
Download from branches/RELEASE_\fBX\fP_\fBY\fP_DRIVEDB.
This also selects the OpenPGP/GPG key for older branches
(5.40 to 6.6: Key ID DFD22559).

Loading…
Cancel
Save